Top » Catalog » Meters » Meters » M1070 My Account  |  Cart Contents  |  Checkout   
Categories
Aeroponic (60) 
Hydroponic (18) 
Nutrients (84) 
Lighting (104) 
Meters (23) 
Oxygenation (13) 
Water Gear (53) 
CO2 (10) 
Electrical (19) 
Plumbing (37) 
Cloning (18) 
Grow Mediums (26) 
Containers (26) 
Mylar and Poly (10) 
Fans (47) 
Room Chillers (7) 
Odor Control (17) 
Accessories (18) 
What's New? more
Holland Secret Starter Kit
Holland Secret Starter Kit
$14.99CAD
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Contact Us
Nutradip Light Meter
[M1070]
$129.99CAD

In every green house, density of light is a major factor for the plants. For this reason, North American Greenhouse Supplies has introduced the world's portable light meter. The Light Monitoring System (LMS) is capable of measuring a wide range of luminous of light for any hydroponic grower. This is brought to you using the latest electronic technology and using a silicon pin photodiode enhanced for blue sensitivity.

The LMS meter is very easy to operate. It is designed to measure the luminous of light in the unit of Lux. It has only an on/off switch to display readings on a large seven segment LCD display. The LMS meter comes in a specially designed hand held case.

Introduction

Digital light meter is design to measure the Luminous of light in the unit of Lux. The meter indicates the lumen of light measurement on a large 31/2, 7-segment LCD display. The units display the measured range from 0 to 199900 Lux. It is use 9V battery as a power source.
It is using a quick respond silicon photo pin diode as a sensor material with the operating temperature of -40 degree to 80 degree Celsius.

Components

·LMS meter ·9 Volt battery
Preparing and Measuring Luminous of Light 1.Unpack meter 2.Turn the switch on, which locate at the right hand side of the meter. 3.Held the meter to the light source you want to measure (be sure to point the sensor toward to light source). 4.In a few second the display unit will indicate the value of the measured light

Calibration of the Light

If calibrated is needed, use a new High Pressure Sodium (H.P.S) or Metal Halide (M.H) bulb to calibrate. Mount the bulb vertically and measure one foot away from the middle of the bulb. Below is the specification of the bulb for calibrate the meter (Table 1):
Table 1
1.Insert a small flat head screwdriver into the left of the two’s calibration hole (Figure 1). Gently turn the screwdriver until it is properly seated in the screw slot. Figure 1. 1: Calibration 2.Slowly turn the screwdriver to adjust the reading until it matches the Luminous of the bulb. 3.If you need a higher rang on the reading please insert a small Phillip (#00) screwdriver into the right of the two’s calibration hole. Gently turn the screwdriver until it is properly seated in the screw head. Make sure don’t over turn it or else you will damage the Calibration resistor. 4.Slowly turn the screwdriver to adjust the range. 5.After you finish adjusts the range; don’t forget to recalibrate the reading-using step 1 and 2.

WARRANTY POLICY: We have two years limited warranty on all of our meters.

First Year:

One-year manufactures’ parts and labour warranty on all of our LMS meter.

Second Year:

The customer can change their defective meter (only if the problem is a manufacture part’s defect) with our reconditioned meter for the cost of $40.00 plus $5.00 shipping and handling charge. The reconditioned meter comes with a six months manufactures warranty on parts, probe and labour.

For more information, please visit this products webpage.
This product was added to our catalog on Tuesday 30 April, 2002.
Reviews
Shopping Cart more
1 x 98 Cube Slab Full Box
1 x Coconut Fiber Block
1 x 3 inch Wrapped No hole
1 x 4 inch Wrapped Full Box No Hole
1 x 3 inch Wrapped Full Box No hole
1 x 3 inch Wrapped Full Box small hole
1 x 1 inch Wrapped
1 x 4 inch Wrapped 2 hole
1 x Coconut Fiber Brick
1 x 4 inch Wrapped Full Box small Hole
1 x 2 inch Wrapped
1 x 4 inch Wrapped Full Box 2 Hole
1 x 2 inch Wrapped Full Box
1 x 3 inch Wrapped Full Box large hole
1 x 98 Cube Slab
1 x 1 inch Wrapped Full Box
$2505.13CAD
Notifications more
NotificationsNotify me of updates to Nutradip Light Meter
Tell A Friend
 
Tell someone you know about this product.
Reviews more
Write ReviewWrite a review on this product!
Currencies
Information
Official PayPal Seal,and Verify My PayPal Status
I accept payment through PayPal for all Hydroponic and Aeroponic Supplies
  Company   Your Account   Customer Service   Site Map
·
contact us
·
create an account
·
contact us
·
view site map
·
privacy policy
·
login to your account
·
track your order
·
view full catalog
·
terms & conditions
·
forgotten you password?
·
shipping & returns
·
hydroponic books